Mildew and Mould
Use at a ratio of 1:4 (20% solution, 200ml per litre) with potable water. Spray onto surfaces and wipe with a damp cloth. Rinse surfaces thoroughly with water.
Toilet Bowls
Pour directly undiluted around the bowl and allow 5-10 minutes dwell time before agitating and flushing.
Exterior washing (heavy-duty)
Use at a ratio of 1:20 (5% solution, 50ml per litre),
Exterior (light-duty)
Use at a ratio of 1:50 (2% solution, 20ml per litre).
Sanitising
Use at a ratio of 1:40 (2.5% solution, 25ml per litre) then rinse to finish.
This product has bleaching properties and can permanently bleach colour from textiles and older painted surfaces. Always test on an inconspicuous small area before proceeding.
TIPS
When diluted has a high foaming action that allows it to adhere to vertical surfaces to give longer dwell times for bactericidal activity.
NZ DHB and MOH Guidelines for use of Sodium Hypochlorite when mixed in solution with potable cold water:
Critical Hard Surface Hygiene; Floors, Taps, Toilets, Baths, Sumps, Sluices; 2% solution (1:49) provides 1,000PPM FAC (MOH & DHB) Faecal and Heavily Soiled Surface Hygiene: 10% solution (1:9) provides 5,000 PPM FAC (MOH) Blood and Body Spills: 20% solution (1:19) provides 10,000 PPM FAC (DHB)
GOOD PRACTICE
Under Good Practice Protocol based on accepted international research a 1% solution of this product diluted with potable water is recommended with liberal application on clean hard surfaces with a minimum contact time of 5 minutes. At this concentration the product provides 500PPM FAC.
View all exterior cleaning products HERE
